Showing 0–10 of 829 results

This 6 ft. 2-inch floor cable duct features a rounded top with a snap lid that provides easy access to cables while maintaining a neat, clutter free appearance.The floor cable duct provides a safe way to run cable across a floor or hallway, reducing tripping hazards and cable tangles.The StarTech.com Advantage- Includes high quality double-sided adhesive tape- Benefits of PVC material: high impact resistance, warp-proof, and self-extinguishing

"Connect a VGA monitor to a DisplayPort-equipped PCThis DisplayPort to VGA adapter lets you connect your DP computer to a VGA monitor or projector. The adapter works with DisplayPort computers like your HP Elitebook Revolve 810 G3.Easily connect your DisplayPort computer to a VGA displayThe DP to VGA adapter lets you connect your DisplayPort laptop or desktop computer to a VGA display. The adapter supports plug-and-play connectivity ensuring a hassle-free setup.Works with legacy VGA monitorsThe DisplayPort adapter makes your DP computer fully compatible with existing VGA monitors or projectors in your home or around your office. The VGA connector features nuts that mate with the screws on standard VGA cables, to ensure your video cable won’t get disconnected.Designed for maximum portabilityThe DisplayPort to VGA converter maximizes portability with a compact, lightweight design, making it the perfect travel accessory to carry with your DisplayPort laptop, fitting easily into your laptop bag or carrying case. This ultra-portable design makes this adapter perfect for BYOD (Bring Your Own Device) applications at the office.Crystal-clear picture qualityWith support for video resolutions up to 1920x1200 or 1080p, you’ll be surprised at the picture quality the adapter provides, even when connected to a legacy VGA monitor, projector or television. The adapter harnesses the video capabilities built into your DP connection to deliver every detail in stunning high-definition.The DP2VGA2 is backed by a 3-year StarTech.com warranty and free lifetime technical support.The StarTech.com Advantage- Hassle-free connectivity with plug-and-play DP to VGA video adapter- Maximum portability with a small footprint and lightweight design- Crystal clear picture quality with support for high-definition video resolutions up to 1920x1200 or 1080pStarTech.com’s AD105X1 is a screwmounted, two-piece plastic wiring duct available in various sizes. The parallel openings on its walls make for easy customization and the snap-lid provides easy access to cables while maintaining a tidy appearance. The AD105X1 screws into walls to provide a protective channel for cables, keeping them out of the way to eliminate clutter.The StarTech.com Advantage- Parallel openings on both sidewalls facilitate customization- Benefits of PVC material: high impact resistance, warp-proof, and self-extinguishing- 5'6""/1.7m long"

High-Strength Base Bracket Helps You Create Custom Cable Management SchemesThe SmartRack® SRWBUNVBASE is a black powder-coated metal bracket for easy installation with your wire mesh cable tray. This standoff base bracket allows you to mount straight sections of cable tray to the floor of your data center, network closet or industrial space and extend your cable management application. Four inches in height, the bracket mounts to the floor with user-supplied hardware and then easily snaps into the wire mesh.

StarTech.com’s AD3X3 is a screwmounted, two-piece plastic wiring duct available in various sizes. The parallel openings on its walls make for easy customization and the snap-lid provides easy access to cables while maintaining a tidy appearance.The AD3X3 screws into walls to provide a protective channel for cables and keeping them out of the way and clutter-free.

Hanging Ceiling Bracket Helps You Create Custom Cable Management SchemesThe SRWB12CROSSBRKT is a black powder-coated metal cross-bracket that allows you to hang wire mesh cable tray from the ceiling of your data center, network closet or industrial space. It attaches to the ceiling with user-supplied hardware and then effortlessly snaps into the wire mesh. For best practice, tray support is recommended approximately every 5-ft. (1.52 m).Designed to Work with Wire Mesh Cable TraysThis bracket is compatible with 300-millimeter cable trays (SRWB12210STR and SRWB12410STR) and M6, M8 and M10 threaded rods (not included).

The vertical channels have smooth plastic fingers at 1U increments to allow patch cords to enter and exit in an organized manner.Includes: Mounting Hardware, Qty 6 Cable retainers with snap hinges.

Ensures a Proper Bend Radius to Reduce Cable Stress and Keep Your Cable Tray OrganizedThis SmartRack® exit clip helps reduce bend-induced stress, pinching, pressure points and fatigue in your wire mesh cable tray system. It mounts to the cross member of the tray to route copper cables down through an opening in the side of the wire mesh. The SRWBWTRFL is 90 millimeters wide and snaps to the wires with no hardware needed. You can also snap adjacent exit clips into the tray to expand the width of your bundled cable drop.Typical Application● Reduce stress, pinching, pressure points and fatigue while dropping cables over the side of the wire mesh cable trayIntroduction Bullets● Maintains a bend radius while dropping cables over the tray’s side● Keeps cables straight and organized when exiting or entering cable tray● Fixed metal waterfall snaps into tray surface with no hardware required● Made from resilient black powder-coated metal designed to lastPackage Includes● SRWBWTRFL Cable Exit Clip/Dropout Waterfall, 90 mm Wide● Installation guide

20 Pack | Lateral Elbow Connector | White | UL ApprovedThis 20-pack of raceway lateral elbows work with the StarTech.com CBMWWD3211 raceway system.Join Two Raceways Together and Run them up the Wall at a 90 Degree AngleUse these cable raceway lateral elbows with the StarTech.com CBMWWD3211 raceway to join two of them together at a 90 degree angle to extend the length of your raceway up walls in your office or server room.Industrial StrengthMade from sturdy self-extinguishing ABS that's also warp proof, these wiring duct elbow connectors are UL approved with 94HB Flamability (Horizontal Burning) Rating.Use in Combination with Other Raceway AccessoriesCombine this lateral elbow with other StarTech.com CBMWWD3211 raceway system accessories to give your cable management solution a finished look.The Coupler (CBMWWD3211C) (20-Pack), joins two raceways together and extends the length of your raceway.The End Piece (CBMWWD3211E) (20-Pack), cleanly caps off the end of your raceway.The Inside Elbow (CBMWWD3211I) (20-Pack), joins two raceways together inside of corners at a 90 degree angle.The Outside Elbow (CBMWWD3211O) (20-Pack), joins two raceways together around corners at a 90 degree angle.The T Connector (CBMWWD3211T) (20-Pack), joins three raceways together in T-bar.These cable management raceway lateral elbows are TAA compliant and backed by a StarTech.com Lifetime warranty and free 24/5 technical support. StarTech.com has been the IT professionals choice for over 30 years.The StarTech.com Advantage- GIVE YOUR CABLE MANAGEMENT RACEWAY A FINISHED LOOK: Use cable raceway L connectors (20 pack) with StarTech.com CBMWWD3211 raceways to join them together at 90 degree angles in your workspace- INDUSTRIAL STRENGTH: Made from sturdy warp-proof ABS, raceway/wiring duct fitting right angle L type flat connectors are UL approved, UL 94HB Flammability (Horizontal Burn) Rated, self-extinguishing- OTHER RACEWAY ACCESSORIES: Coupler (CBMWWD3211C), End Piece (CBMWWD3211E), Inside Elbow (CBMWWD3211I), Outer Elbow (CBMWWD3211O), T Connector (CBMWWD3211T); sold separately

Eliminate Cable Stress by Organizing Copper Cabling Through Your Data CenterThis SmartRack® Wire Mesh Cable Tray is easy to install along the wall, floor or ceiling of your data center. The SRWB6210STR10 is a straight section measuring 3000 millimeters long, but you can cut it with side-action bolt cutters to fit your custom specifications. It also measures 150 millimeters wide and 50 millimeters high to let you neatly bundle network and audio/video cables.Constructed from High-Strength Steel Wire Built to Last in Busy EnvironmentsThe black powder-coated wire is smooth and rounded, which not only protects cable installers and IT personnel from cutting their hands, but also prevents cables from fraying along sharp edges. The rounded wire also prohibits debris from building up on it in dusty network closets and industrial spaces. Large mesh openings allow you to route cables through the spaces if needed.Designed to Give You Great Flexibility in Installation, Transportation and StorageThe SRWB6210STR10 is ideal for data centers, network closets and some industrial areas in a wide variety of applications, including office buildings, shopping centers, schools, hotels, hospitals, restaurants and transportation centers. Each tray can be stacked with another to save space during transportation or storage.

20 Pack | Inside Elbow Connector | White | UL ApprovedThis 20-pack of raceway inside elbows work with the StarTech.com CBMWWD3211 raceway system.Join Two Raceways Together Inside Corners at a 90 Degree AngleUse these cable raceway inside elbows with the StarTech.com CBMWWD3211 raceway to join two of them together at a 90 degree angle to extend the length of your raceway inside corners of your office or server room.Industrial StrengthMade from sturdy self-extinguishing ABS that's also warp proof, these wiring duct elbow connectors are UL approved with 94HB Flamability (Horizontal Burning) Rating.Use in Combination with Other Raceway AccessoriesCombine this inside elbow with other StarTech.com CBMWWD3211 raceway system accessories to give your cable management solution a finished look.The Coupler (CBMWWD3211C) (20-Pack), joins two raceways together and extends the length of your raceway.The End Piece (CBMWWD3211E) (20-Pack), cleanly caps off the end of your raceway.The Lateral Elbow (CBMWWD3211L) (20-Pack), joins two raceways together and runs them up the wall at a 90 degree angle.The Outside Elbow (CBMWWD3211O) (20-Pack), joins two raceways together around corners at a 90 degree angle.The T Connector (CBMWWD3211T) (20-Pack), joins three raceways together in T-bar.These cable management raceway inside elbows are TAA compliant and backed by a StarTech.com Lifetime warranty and free 24/5 technical support. StarTech.com has been the IT professionals choice for over 30 years.The StarTech.com Advantage- GIVE YOUR CABLE MANAGEMENT RACEWAY A FINISHED LOOK: Use cable raceway inside corner connectors (20 pack) w/StarTech.com CBMWWD3211 raceways to join them together inside corners in your workspace- INDUSTRIAL STRENGTH: Made from sturdy warp-proof ABS, these inside elbow cable/wiring duct connectors are UL approved with 94HB Flamability (Horizontal Burning) Rating, self-extinguishing- OTHER RACEWAY ACCESSORIES: Coupler (CBMWWD3211C), End Piece (CBMWWD3211E), Lateral Elbow (CBMWWD3211L), Outside Elbow (CBMWWD3211O), T Connector (CBMWWD3211T); sold separately