Showing 520–530 of 951 results

Length: 50-ft. (15.24 m)/Color: White/Connectors: RJ45 maleMeets category 6 cabling standardsPremium cabling for category 6, category 5e and category 5 applicationsHigh-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimumFeature molded connectors with integral strain reliefSnagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation

"CMP plenum-rated, pre-terminated Cat6 patch cableProtective, flexible bootCat6 rated ""staggered"" RJ45 plugs for greatly reduced NEXT"

100-ft. (30.5 m) Blue Cat6 Solid Conductor patch cableMeets Category 6 cabling standardsSolid Conductor 4 Pair Cable for long distance patch runsDrastically reduce impedance and structural return loss compared to Stranded Conductor patch cablesHigh-quality copper wire and a shortened body plug designSnagless boots protect the locking tabs on the RJ45 connectors from being damaged during installation

3-ft. (0.91 m) Blue Cat6, Up Angle to Straight RJ45 - RJ45 Patch cablePVC 4 Pair Stranded Conductors, 24AWGFully Molded EndsETL Verified to TIA/EIA -568-B550Mhz Gigabit Speed Rated

10-ft. (3.05 m) Blue Cat6, Right Angle to Straight RJ45 - RJ45 Patch cablePVC 4 Pair Stranded Conductors, 24AWGFully Molded EndsETL Verified to TIA/EIA -568-B550Mhz Gigabit Speed Rated

This Gray Cat6 crossover molded cable has two standard RJ45 molded male connectors featuring integral strain relief. The cable is designed to connect hub-to-hub, PC-to-PC or Mac-to-Mac and is perfect in conjunction with 10/100/1000Base-T networks. Molded connectors are a different color to help identify this cable as a crossover cable and not a standard Ethernet cable. Manufactured from PVC 4-pair stranded UTP and rated for 550 MHz/1 Gbps communication. Snagless Cat6 cables are also available. Meets most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL.

Designed for premise (in-wall) cabling applications in air ducts and drop ceilingsPremium cabling for category 6, category 5e and category 5 applicationsColor: Gray / Length: 1000-ft.24 AWG 4-pair solid cable with Gray Plenum ( CMP ) jacketDeliver stable performance up to 550MHz/ 1 Gbps communicationMeets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6 draft 11)Available in PVC cable as well (N222-01K-GY and N222-01K-BL)Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

These T1, RJ45-RJ45 ( RJ48C ) cross-over Ethernet cables are constructed with premium Quabbin 9720, T1 certified cable. Two individually shielded, 22 AWG, 100 ohm pairs maximize the performance of your expensive T1 circuits and equipment. Beware of generic T1 Ethernet cables made with inexpensive Cat5 unshielded Ethernet cable. The American National Standards Institute (ANSI) states in ANSI T1.403 that T1 cable be constructed of two balanced pairs, 22 AWG Solid conductor, 100 ohm impedance, with a loss budget of 5.5 db. Cross-over wiring configuration available in 3-foot (0.9-meter), 5-foot (1.5-meter), 7-foot (2.1-meter) and 10-foot (3.1-meter) lengths. Custom lengths available. Consult your reseller. Also available in straight-through wiring configuration. See N265-Series T1 Ethernet cables.

These T1, RJ45-RJ45 ( RJ48C ) cross-over Ethernet cables are constructed with premium Quabbin 9720, T1 certified cable. Two individually shielded, 22 AWG, 100 ohm pairs maximize the performance of your expensive T1 circuits and equipment. Beware of generic T1 Ethernet cables made with inexpensive Cat5 unshielded Ethernet cable. The American National Standards Institute (ANSI) states in ANSI T1.403 that T1 cable be constructed of two balanced pairs, 22 AWG Solid conductor, 100 ohm impedance, with a loss budget of 5.5 db. Cross-over wiring configuration available in 3-foot (0.9-meter), 5-foot (1.5-meter), 7-foot (2.1-meter) and 10-foot (3.1-meter) lengths. Custom lengths available. Consult your reseller. Also available in straight-through wiring configuration. See N265-Series T1 Ethernet cables.

This Red snagless Cat5e Ethernet cable has two snagless RJ45 molded male connectors featuring integral strain relief. The cable is manufactured from PVC 4-pair solid UTP and is rated for 350 MHz/1 Gbps communication. All cables are offered in a variety of lengths and colors for all Cat5 and Cat5e cabling needs. Standard, non-snagless Cat5e cables are also available (N002-Series).