Showing 0–10 of 67 results

1.83 m 3-in-1 Cable Connects Your DisplayPort Computer to a Tripp Lite NIAP KVM SwitchThis cable features DisplayPort, USB A/B and 3.5 mm audio connectors on both ends for connecting your computer to a KVM switch. Designed specifically for the Tripp Lite B002-DP1A4 NIAP KVM, the 1.83 m cable supports DisplayPort video resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with true 4:4:4 chroma subsampling. It’s compatible with HDCP 2.2, DisplayPort 1.2 and USB 2.0 (480 Mbps) standards. By combining three different cables into one convenient cord, you cut down on unnecessary clutter and save money.Typical Application● Connect a headless computer to a Tripp Lite KVM switch● Upgrade or replace worn or lost KVM cables● Eliminate clutter by replacing multiple cables with one new one● Extend the distance between the KVM switch and computer to 1.83 mIntroduction Bullets● Cuts cable clutter and saves money by combining 3 essential KVM cables into one● Delivers UHD picture quality at resolutions up to 3840 x 2160 (4K x 2K) @ 60 Hz● Supports true 4:4:4 chroma subsampling to meet latest color standards● Transfers data at reliable USB 2.0 speeds up to 480 Mbps● Plug-and-play operation with no software required for easy, immediate installationSystem Requirements● Tripp Lite B002-DP1A4 or other compatible NIAP KVMPackage Includes● P783-006 DisplayPort KVM cable kit, 3 in 1 (M/M), 1.83 m

The P778-010 KVM cable kit is designed to connect a USB or PS2 computer to NetDirector® KVM Switches B020-U08-19-K and B020-U16-19-K. This premium all-in-1 cable provides superior performance and cable management. It consists of a USB and PS/2 keyboard/mouse cable and a monitor cable bonded into a single unit. This low-profile cable is incredibly flexible, making cable management a breeze. All cables are manufactured from superior molded cable with integral strain relief and foil shielding for maximum EMI/RFI protection.

Connects a USB or PS/2 computer to NetController KVM Switches (B042-Series KVM Switches)KVM Switch side of the cable kit consists of a HD15 Male cableComputer side of the cable kit consists of a HD15 Male cable, a PS/2 (MiniDIN6) Male Keyboard cable, a USB A Male cable and a USB A Female to PS/2 (MiniDIN6) Male AdapterProvides superior performance and cable managementLow-profile cable is super flexible and easy to controlSuperior molded cable with integral strain relief and double shielding (foil and braid) for maximum EMI/RFI protection

This USB/PS2 (All-in-1) KVM cable kit is designed to connect a USB or PS/2 computer to NetController® KVM Switches (B042-Series KVM Switches). This premium All-in-1 cable provides superior performance and cable management. The KVM Switch side of the cable kit consists of a HD15 Male cable. The computer side of the cable kit consists of a HD15 Male cable, a PS/2 (MiniDIN6) Male Keyboard cable, a USB-A Male cable and a USB-A Female to PS/2 (MiniDIN6) Male Adapter. All cables are manufactured from superior molded cabling with integral strain relief and foil shielding for maximum EMI/RFI protection.

8-Pack of B078-101-USB-1 Server Interface UnitsNeeded to connect a USB Server to a B070 / B072-Series NetCommander KVM switch via Cat5e cable Eliminates the need for thicker, heavier KVM cablesCompact, lightweight designPlug and Play; no software requiredNo power supply requiredAllows a Server/CPU to be located up to 100-ft. (30.5 m) away from the KVM switchTo convert DisplayPort or HDMI computers to VGA, use adapters P134-06N-VGA-V2 or P131-06NCompliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Connects a USB computer to B020- and B022-Series KVM SwitchesKVM Switch side of the cable kit consists of a HD15 Male cableComputer side of the cable kit consists of a HD15 Male cable and a USB A Male cableProvides superior performance and cable managementMolded ends with easy-grip textured overmoldLow profile cable is super flexible and easy to controlSuperior molded cable with integral strain relief and double shielding (foil and braid) for maximum EMI/RFI protection

The NetCommander USB Server Interface Unit (SIU) with Virtual Media support connects to the HD15 port and USB ports on a computer/server and converts them to a single RJ45 connector. Shielded Cat5e/6 cable can then be used to connect the server to the switch ports on a NetCommander Cat5 IP KVM switch. A 5-foot (1.5-meter) Cat5e shielded Ethernet cable is included with the product. Supports Virtual Media with data transfer rates up to 12 Mbps. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Connects a USB or PS2 Computer to NetDirector B020-U08-19-K and B020-U16-19-K KVM SwitchesMakes management and organization of cables much easierKVM Switch side of the cable kit consists of a modified HD18 Male cableComputer side of the cable kit consists of a HD15 Male cable, USB A Male cable, and 2 x PS/2 Male cablesMolded, color-coded connectors

Needed to connect a USB Server to a B070 / B072-Series NetCommander KVM switch via Cat5e cable Eliminates the need for thicker, heavier KVM cablesCompact, lightweight designPlug and Play; no software requiredNo power supply requiredAllows a Server/CPU to be located up to 100-ft. (30.5 m) away from the KVM switchTo convert DisplayPort or HDMI computers to VGA, use adapters P134-06N-VGA-V2 or P131-06NCompliant with the Federal Trade Agreements Act (TAA) for GSA Schedule Purchases

This daisy-chain cable is designed to connect a B020 / B022 NetDirector® KVM switch to another NetDirector KVM switch, allowing for the expansion of the number of computers/servers that can be controlled from a single keyboard, mouse and monitor. This premium cable features a PVC jacket and double shielding (foil and braid) for maximum EMI/RFI protection. The cable's DB25 connectors are molded with integral strain relief and easy-grip textured overmold.