Showing 330–340 of 650 results

The SRW21UG SmartRack® 21U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is ideal for storing EIA-standard 19-inch rack equipment in network closets, retail locations, classrooms and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds (90.7 kilograms).The front door features a shatter-resistant clear acrylic window that lets you monitor equipment without unlocking the enclosure. Not only does the window help prevent equipment tampering and reduce acoustic noise, but it also adds visual flair to your IT installation.To ensure your valuable equipment stays secure, the side panels and front door lock. The top, bottom and removable side panels are vented, which allows air to flow freely through the cabinet to keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180 degrees before mounting. Convenient top and bottom ports allow easy cable routing through the cabinet.The SRW21UG comes fully assembled and ready to mount to the wall or use the optional SRCASTER caster kit (sold separately) to make it a mobile rolling rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.

The SRW26USG SmartRack® 26U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 250 pounds (113.4 kilograms).The front door features a shatter-resistant clear acrylic window that lets you monitor equipment readouts without unlocking the enclosure. Not only does the window help prevent equipment tampering and reduce acoustic noise, but it also adds visual flair to your IT installation.The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180 degrees before mounting. Convenient top and bottom ports allow easy cable routing.The SRW26USG comes fully assembled and ready to mount to the wall, or use the optional SRCASTER rolling caster kit (sold separately) to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

Tripp Lite's B013-330 Cat5e KVM Extender Kit utilizes Cat5 cabling to extend your computer's Keyboard, Monitor, and Mouse control up to 100 meters away. The Cat5 KVM Extender Set comprises two units - the Transmitter (Local Unit) and the Receiver (Remote Unit). The Transmitter Unit contains local console ports, allowing the user to have both a local and remote console. The Receiver Unit contains Gain and Equalization knobs that allow the user to manually adjust the video parameters of the remote console. Users can easily optimize the video screen output via these mechanical knobs.● Enables you to control a PS/2 or USB computer/KVM switch from a distance of up to 100m away.● Can control the computer or KVM switch via both Local and Remote Consoles.● The remote connection is made using standard Cat5e cable● Display mode of 1600 x 1200 @ 60Hz● Shielded Cat5e cables provide better transmission integrity● Manage a PS/2 or USB computer/KVM switch from a remote location up to 100m away● Use readily available Cat5e cable for interconnectionPackage Includes● Transmitter and Receiver Unit (1 each) ● 3-ft. PC/KVM Cable Kit (1) ● Power Adapter (DC9V, 1A) for Receiver Unit (1) ● 4-ft. USB A-B Cable (1) ● Quick Start Guide

2POSTRMKITHD is engineered to support the mounting of a single 2U or larger rackmount SmartPro or SmartOnline UPS power module, transformer module or battery pack in a 2 post rack environment

The B155-003-DP-V2 3-Port Mini DisplayPort 1.2 to DisplayPort MST Hub connects up to three DisplayPort monitors to the Mini DisplayPort output on your computer. Ideal for digital signage in schools, churches, conference rooms, trade shows, hotels and retail outlets, this hub allows you to display the same image on all three monitors, extend the desktop across them, or combine all three as one large monitor in video wall mode. The B155-003-DP-V2 is compliant with DisplayPort 1.2 and backward compatible with versions 1.1 and 1.1a with the feature set being limited to that of your equipment. It supports Ultra High Definition (UHD) video resolutions up to 3840 x 2160 (4K x 2K) at 24/30 Hz. In video wall mode, it supports expanded resolutions, such as 5760 x 1080 in a horizontal 1 x 3 monitor configuration or 1920 x 3240 in a vertical 3 x 1 configuration. This MST hub also supports HDCP, EDID, DDC and 48-bit Deep Color (16 bits per channel), as well as DTS-HD, Dolby TrueHD and 7.1-channel surround sound audio. It works with all operating systems. Plug-and-play convenience means no software or drivers are needed. A built-in 15.24 cm (6-in.) cable connects directly to a Mini DisplayPort source. LEDs indicate when the monitors are receiving a signal.- Supports UHD video resolutions up to 3840 x 2160 (4K x 2K)- Built-in 6 in. cable connects directly to Mini DisplayPort source- Supports up to 48-bit Deep Color (16 bits per channel)- Works with all operating systems- Supports DTS-HD, Dolby TrueHD and 7.1-channel surround sound- Ideal for digital signs in schools, churches, conference rooms, trade shows and retail settings- Displays same image on 3 monitors simultaneously in mirror mode- Extends desktop across 3 monitors in extended mode- Combines 3 monitors into one large monitor in video wall mode- Built-in 6 in. cable connects directly to Mini DisplayPort source- LEDs indicate when monitors are receiving a signal- Supports UHD video resolutions up to 3840 x 2160 (4K x 2K) @ 24/30 Hz- Supports expanded resolutions in video wall mode, such as 5760 x 1080 in horizontal 1 x 3 configuration- Supports HDCP, EDID and DDC- Supports 48-bit Deep Color (16 bits per channel)- Supports DTS-HD, Dolby TrueHD and 7.1-channel surround sound audio- Works with all operating systems- Plug and play—no software or drivers required

Active Adapter Makes a DVI Video Source Compatible with Your VGA MonitorThis active DVI-D to VGA converter cable makes it possible to send a DVI-D digital signal from your computer or other source device to a VGA analog monitor. Connect the built-in 6-in. (15.2 cm) cable with DVI-D single-link male connector to the DVI port on your video source device. Then, connect a VGA cable, such as a P502-series VGA cable, from your monitor to the converter. The converter supports VGA cables up to 100-ft. (30.5 m), providing flexibility in device placement.Save Money without Sacrificing Image Quality This DVI-D to VGA active adapter helps you save money by making your current VGA monitor compatible with a computer or other source device equipped with a DVI output. It supports computer video resolutions up to 1920 x 1200 and HD resolutions up to 1920 x 1080 (1080p). Active digital-to-analog circuitry and quality manufacturing ensure a clean, consistent video signal.Simplify Installation with a Plug-and-Play SolutionCompletely plug and play, this DVI-D to VGA active adapter does not require software or drivers. The DVI-D cable is built-in, so the only cable you need to supply is your device's VGA cable. If your application requires power, use the included USB Micro-B cable to connect the converter to a USB port on your monitor or a USB wall outlet.3-Year WarrantyThe P120-06N-ACT is backed by a 3-year warranty, ensuring reliability and performance.

PDUMVROTATEBRKT enables toolless installation of select PDUs in 0U vertical orientation with rear-facing outlets to facilitate better rack front-to-rear airflow and equipment access. Pair of brackets with installation buttons snap into the accessory mounting rails in equipped racks. Each bracket accepts a PDU button mount that snaps into place to securely hold a PDU as it distributes power to your rack enclosure.Compatible with PDU1415, PDU1420T, PDU40TDUAL, PDUV15, PDUV20, PDUV30HV, PDUMV15, PDUMV20, PDUMV40, PDUMV30, PDUMV20HV, PDUMV30HV, PDUMV15NET, PDUMV20NET, PDUMV30NET, PDUMV20HVNET, PDUMV30HVNET and other PDUs referencing this accessory.

The SR42UBMD offers 36 inches (927 millimeters) of depth opposed to the standard 42 inches.The SR42UBMD features a massive front-to rear ventilation capacity that meets or exceeds server manufacturer requirements. Its integrated baying tabs make it easy to combine multiple enclosures in rows for data center applications. This enclosure is also compatible with hot-aisle/cold-aisle configurations.Three-thousand pounds (1360.8 kilograms) of standard 19-inch rack equipment in 42U is housed inside the SR42UBMD. Its front and rear pairs of vertical rails have square mounting holes that are adjustable in quarter-inch increments from four to 28.75 inches. Adjustment is quick and an easy-view depth index ensures consistent rail placement without requiring time-consuming measurements. Each rack space within the enclosure is numbered for ready reference.Two of the adjustable vertical mounting rails support toolless button-mount 0U installation of up to four compatible PDUs and cable managers. This feature makes it easier to route cabling to rack equipment and reduces cord clutter.With its locking, reversible, removable front and rear doors and locking, removable side panels, the SR42UBMD provides ultimate equipment safety. The side panels are half size for ease of removal and reinstallation. The split rear door design allows the enclosure to be placed closer to a wall. The SR42UBMD meets all requirements toward PCI DSS compliance.The top panel of the SR42UBMD is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes ports for cable routing and can be quickly removed without tools. To facilitate cable access, the SR42UBMD is open-bottom.All components of the SR42UBMD are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility earth ground. The removable front and rear doors feature quick-release ground wires.To simplify deployment, the SR42UBMD comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be secured by adjusting the preinstalled levelers. Note: The casters are intended for minor position adjustments and are not designed for moving the enclosure over long distances.

Single Steel Side Panel for Installation on Your 48U Rack CabinetThe SmartRack® SR48SIDE side panel features pre-installed key-locking latches for securing your rack equipment against tampering and theft. Designed for standard-depth SR48UB rack frame, this panel can also be added to the side of an expansion cabinet (SR48UBEXP) when application needs have changed or onto a wide cabinet (SR48UBWD) as the depth remains the same. They can also be used as replacements for existing side panels.Convert an Expansion Cabinet into a Cabinet with Side PanelsWhen needs change and you want to separate your expansion rack cabinets (such as SR48UBEXP), add four** SR48SIDE heavy-duty steel panels to the sides of them to convert the racks into standard cabinets. Note: This package includes only one (1) singular panel. You will need to purchase four SR48SIDE panels to completely populate an expandable rack.

SmartRack® High-Capacity SRCABLEDUCT1UHD helps eliminate cable stress for your rack enclosure or open frame rack. The 1U 19-inch horizontal high-capacity cable manager (finger duct with dual-hinge cover) organizes cables within the SmartRack enclosure or open rack. Required mounting hardware is included.