Showing 0–10 of 1189 results

"The RAM motorcycle handlebar base contains a 1.5"" rubber ball designed to sit at right angles to the mounting rail. The zinc coated u-bolt accommodates rails in diameter from 0.5"" to 1.25"" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5""."

"The RAM-202CNSU consists of a 1.5"" diameter rubber ball connected to a flat 2.5"" diameter base with 3/8""-16 female threaded hole. This mount has pre-drilled holes, including the universal AMPS hole pattern."

"The RAM-202U-24 contains a 1.5"" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1.5"" x 3.5"" center to center."

RAM Mounts RAM-202U-2525 mounting kit

"The RAM-202U-RYM1 consists of a 1.5"" diameter rubber ball connected to a flat 2.5"" diameter base. The base has pre-drilled holes, including the universal AMPs hole pattern. Included are (3 quantity) (#8-32 x 3/4"" PH PD Mach Screws) and (3 quantity) (#8-32 SS Nylock Nuts) that will connect the RAM-202U-RYM1 to the bottom of all Raymarine Dragonfly Sonar/GPS devices."

The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four side clamping arms with rubber grips to keep your laptop secure in any rugged environment. These arms can be moved both vertically and horizontally, allowing a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.

"The RAM-235U consists of a double U-bolt base with 1.5"" diameter ball and two stainless steel u-bolts. The double U-bolt base will accommodate rails from 1"" to 1.25"" in diameter."

The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four flat side clamping arms, allowing your laptop to close completely while in the tray. These arms can be moved both vertically and horizontally, allowing a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.

"RAM Mounts RAM-201MU. Weight: 12 oz (340 g), Height: 5.69"" (144.5 mm)"

"The RAM-232-90U consists of a 2.5"" diameter base with 1/2"" NPT female thread at a 90 degree angle to the base. This part connects to any 1/2"" NPT male thread, including the RAM-PA82XX rigid arm series."