Showing 0–8 of 8 results

Freedom Place assets where they are needed - Printer location is functionally and economically driven, not constrained by existing LAN connections. Easy Setup Wired and Wireless Configuration - Configure using a USB cable or without any cables. A print server to connect to most major wireless networks via the 2.4Ghz band using one RP-SMA connector with antenna. Embedded Web Page The embedded web page allows administrators to flash update printer firmware or access printer settings using a web browser to monitor printer status and change default settings easily. Network Communications Security SNMPv3 supports encrypted and authenticated management traffic protecting remote configuration and device status messages.IPSec can be used with both TCP/IP IPv4 and IPv6 networks and provides encryption and authentication of communications at the network layer.

The RS-232C Serial Interface Card installs into the printer's internal port. It supports a standard RS-232C interface using a 25-pin D-shell female connector.

Lexmark 512MB DDR2Optra Lexmark International, Inc. is a leading developer, manufacturer and supplier of printing solutions -- including laser and inkjet printers, multifunction products, associated supplies and services. This memory module holds 256MB of data.

To get vibrant, long-lasting prints of the highest quality, use Lexmark original consumables in your printers or all-in-ones. Lexmark consumables have been developed hand-in-hand with our sophisticated print heads to prevent smudging and clogging. Using original consumables gives you great prints and keeps your device in good shape.

The RS-232C Serial Interface Card installs into the printer's internal port. It supports a standard RS-232C interface using a 25-pin D-shell female connector. For use with Lexmark printers that contain an open slot. -Configuration settings for the serial interface are available using the Serial Opt Menu from the printer's operator panel. Baud rates from 1200 to 115.2K are supported. -Baud rates:1200, 2400, 4800, 9600*, 19.2K, 38.4K, 57.6K and 115.2K; 7 bit or 8* data bits; Parity - Odd, Even, None*, Ignore; Start and Stop Bits; DSR/DTR Data Flow control with DTR pacing, DTR/DSR, XON/XOFF, XON/XOFF/DTR, or XON/XOFF/DTR/DSR flow control protocols. -RS-422 is not supported. -See the Technical Reference for more information about the serial and parallel interfaces.

The Parallel 1284-B Interface Card installs into the printer's internal port. It supports a parallel 1284-B compliant interface using a 36-pin D-shell female, bi-directional connector. It is recommended that a Lexmark 10' Parallel cable (P/N 1021231) or a bidirectional IEEE 1284 complaint cable be used to avoid compatibility problems. See the Technical Reference for more information about the parallel interface.

Lexmark 256MB DDR2 Optra Lexmark International, Inc. is a leading developer, manufacturer and supplier of printing solutions -- including laser and inkjet printers, multifunction products, associated supplies and services. This memory module holds 256MB of data.

AFP/IPDS printingPrint either host-based or client-based output on your network-attached Lexmark laser printer. With a Lexmark Card for IPDS option, use your MFP or printer for both network printing and for IBM iSeries (AS/400) or IBM zSeries computer jobs.Print bar codes, forms, publications and graphics closer to your end users giving you the associated cost and time savings from true distributed printing. So now direct your AFP/IPDS output using the TCP/IP protocol.Colour printing to shades of graySupports Function Set 45 (FS 45) for full colour printing. Color Management Object Content Architecture (CMOCA) resource support for colour printing. Colour documents are transformed into black and shades of gray based on the Color Mode setting.Maximise productivityLocate your printer wherever you need it to maximise its productivity. With Lexmark's SmartSwitch auto-emulation sensing built into every Lexmark laser printer, your printer will automatically switch to the proper document language, whether it is IPDS, PostScript or PCL???. Configure IPDS configuration settings using the MarkNet??? print server's resident web server, a browser and the printer's IP address.Notable FeaturesHost Resource Resolution is sensed (Auto) to enable support for 240, 300 and 600 dpi. Supports 2-dimensional bar codes such as PDF 417, DataMatrix, Maxicode and Quick Response(QR). Supports 1-dimensional bar codes such as Code 128, US Postal bar codes including PLANET and Intelligent Mail Container, Royal Mail bar codes including Red Tag, and other retail and postal bar codes.Font Capture to Reduce Network TrafficUsing Print Services Facility (PSF), capture fonts (including Chinese, Korean and Japanese), either TrueType, bitmaps or outlines, to hard disk or to flash memory resulting in reduced network traffic.ConsiderationOnly one of these cards may be used at any time: Forms and Bar Code, Card for IPDS, Card for PRESCRIBE or Lexmark PrintCryption Card. These cards are installed in the same single connector.