Showing 20–30 of 47 results

Product DescriptionThe Extender for Logitech video conferencing systems extends the camera or speakerphone and an HDMI AV signal up to 65 feet away from the system hub. This solution requires a RapidRun Optical runner cable (Included) for extension, and installation is made easy through labeling. This extension solution passes the audio and video signals to the Logitech hub, but, when extending the camera, it also passes the control signals. These control signals allow the camera to continue to move as if it were directly connected to the hub with the cable provided by Logitech. This means that full functionality of the GROUP, SmartDock, or CC3000E systems will be retained at full extension distance. The extender also allows for HDMI A/V signal to be extended from the extender transmitter box to the receiver box, allowing a/v signal to be delivered to a remote display. Power can be delivered at both ends via two AC power adapters (Included) or power can be delivered from the transmitter to the receiver over a solid conductor Cat5e/Cat6 cable (Not Included). The capabilities provided by this kit add value and flexibility to the Logitech GROUP, SmartDock, or CC3000E video conferencing systems, making it the perfect fit for almost any application.

The HDMI+RS232 over Cat5 Receiver, when paired with a transmitter (not included- #29271) allows for the extension of an HDMI signal over solid conductor Cat5e/6 twisted pair cable* up to 300ft without signal degradation at a 1080p video resolution. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. In addition, this solution utilizes TruChoice™ Power which provides the flexibility to power the system with a single power supply at either the transmitter or receiver end. HDBaseT technology allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension. The HDMI over Cat5 extenders support advanced HDMI features such as 3D, auto lip sync, deep color, Dolby & DTS 7.1 audio, CEC and a 10.2 Gbps data transfer rate.The serial RS232 port acts as a pass-through allowing remote control of the display.*Stranded Cat5e/6 cables may be used for HDMI extension applications up to 250ft. Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments.- Single Cat5 cable required for HDMI extension- HDMI features supported- 3D- Auto lip sync- Deep color- Dolby & DTS 7.1 Audio- Consumer Electronics Control (CEC)- 10.2 Gbps- EDID pass through- FCC, CE, RoHS compliant- Requires a transmitter to function - #29271

DisplayPort to HDMI HDBaseT Extender over Cat (TAA Compliant)The DisplayPort to HDMI HDBaseT over Cat Extender is an ideal solution for connecting the DisplayPort output of a laptop or other device to the HDMI input of a HDTV or projector over a single Cat5e, Cat6, or Cat6a cable up to 300ft at a 1080p resolution. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice power, which allows power to be supplied over the Cat cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension.

Product DescriptionThe Extender for Logitech video conferencing systems extends the camera or speakerphone and an HDMI AV signal up to 50 feet away from the system hub. This solution requires a RapidRun Optical runner cable (Included) for extension, and installation is made easy through labeling. This extension solution passes the audio and video signals to the Logitech hub, but, when extending the camera, it also passes the control signals. These control signals allow the camera to continue to move as if it were directly connected to the hub with the cable provided by Logitech. This means that full functionality of the GROUP, SmartDock, or CC3000E systems will be retained at full extension distance. The extender also allows for HDMI A/V signal to be extended from the extender transmitter box to the receiver box, allowing a/v signal to be delivered to a remote display. Power can be delivered at both ends via two AC power adapters (Included) or power can be delivered from the transmitter to the receiver over a solid conductor Cat5e/Cat6 cable (Not Included). The capabilities provided by this kit add value and flexibility to the Logitech GROUP, SmartDock, or CC3000E video conferencing systems, making it the perfect fit for almost any application.

"The Port Authority2 Audio Video Splitter/Extender is ideal for distributing audio and video to classrooms, exhibits, trade shows, demonstrations, and multimedia presentations. This splitter will broadcast your computer’s audio and video output to multiple destinations. Daisy-chain more than one splitter to expand the number of monitors and speakers you can reach. With the built-in video signal enhancement, you can place monitors up to 210 feet away while maintaining your video quality. From use in test bench facilities, data centers and help desks to video broadcasting, the Port Authority2 Audio Video Splitter/Extender delivers both performance and value. Features: - Broadcast your computer’s audio and video outputs to two monitors. - Daisy-chain splitters to expand the number of monitors and speakers. - Built-in video signal enhancement allows monitors to be placed up to 210 feet away. - Use the 3.5mm audio outputs to drive either speakers or earphones. - Supports video resolutions up to 2048x1536 at 60Hz. - Suitable for VGA, SVGA, XGA, SXGA, UXGA, and Multisync monitors. - Maximum bandwidth of 400MHz. - Audio: 50Hz

The HDMI over Cat Extender Box Transmitter to Box Receiver - 4K 60Hz allows a 4K HDMI source to be extended up to 131ft to a 4K display using a single Cat6/6a Ethernet cable. This is an ideal solution where HDMI video and audio in conference rooms, classrooms, lecture halls, and many other installation needs are far beyond the length limitations of standard HDMI cabling.This HDMI over Cat Extender is HDCP 2.2 compliant, making sure that the connection from the source is secure. Multi-channel audio formats are supported, including PCM 7.1, Dolby TrueHD and DTS-HD Master Audio. With bi-directional Power over Cable (PoC) support, one power adapter at either transmitter or receiver side can power both units, so no additional power adapter is required, allowing for greater flexibility in installations.Note: Ensure a solid, reliable connection between the 4K HDMI Extender and critical equipment. We suggest using HDMI Cables with gripping connectors that provide greater port retention than standard HDMI connectors.Signal Specifications- Video Resolution: Up to 4K resolution at 60Hz, 4:4:4- Transmitter Input/Output Ports: 1 x HDMI IN; 1 x IR OUT; 1 x RJ45; 1 x DC 12V IN- Receiver Input/Output Ports: 1 x HDMI OUT; 1 x IR IN; 1 x RJ45; 1 x DC 12V IN- Audio Formats: Supports Multichannel audio up to PCM 7.1, Dolby TrueHD and DTS-HD Master AudioElectrical Specification- Power Supply: Bi-directional Power over Cable (PoC), one power adapter at either transmitter or receiver side can power both units- Power Adapter: Input: 100-240VAC, 50-60Hz- Power Adapter: Output: 12VDC, 1APhysical Specifications- Operating Temperature: 0°C to 45°C; 10-90% RH (Non-Condensing)- Storage Temperature: -20°C to 70°C; 10-90% RH (Non-Condensing)Physical Characteristics- Transmitter Dimensions (LxWxH): 90x70x15.2mm- Transmitter Dimensions with Mounting Brackets (LxWxH): 90x90x15.2mm- Receiver Dimensions (LxWxH): 90x70x15.2mm- Receiver Dimensions with Mounting Brackets (LxWxH): 90x90x15.2mm- DC Jack: OD = 6.3mm, ID = 2.0mm; CU: Nickel Plating- Power Adapter Cable Length: 1800±50mm- QC Inspection: Bi-directional PoC Test, max length cable transmission, 1080p and 4K 60Hz 4:4:4 video/ image test on all ports, IR control function test and accessory functionality

HDMI Over Cat5/6 Extender up to 164ft (50m) The HDMI Over Cat5/6 Extender is ideal for extending digital video and audio, making it a great solution for digital signs, schools, churches, trade show presentations, or any application where the HDMI source is farther than 50 feet from the display. The extender can also send HDMI signals over existing Cat5 or Cat6 cable infrastructure for cost-effective reliability, while maintaining high performance quality. Convenience This solution is able to extend HDMI video and audio up to 164 feet and requires the use of a single Cat5 or Cat6 patch cable. With no drivers or software to install, the HDMI over Cat5/6 Extender provides total plug and play convenience. Simply connect the transmitter to the video source, the receiver to the display, and extend with a single category cable for quality video and audio. Performance Supporting resolutions up to 1080p at 60Hz and delivering quality sound allows the HDMI extender to meet the requirements for high performance applications and adds greater functionality to displays.

Perfect for situations where two HDMI devices must share a single HDMI input on a display, this HDMI auto switch provides for hassle free operation. Most high-definition audio/video components utilize the HDMI interface to provide crystal clear, digital sound and picture. With the wealth of devices now using HDMI, it's easy to run out of free HDMI inputs on your TV set or receiver. This HDMI selector switch solves the problem by providing additional high-definition digital inputs for sources including DVD player, Blu-ray, Disc and HD-DVD players, gaming systems, and high-definition cable/satellite boxes. The auto switching functionality provides for a system that is easy to use, while manual switching functionality is available for situations where more control is desired.

HDMI Inline Extender - 4K 60HzThe HDMI In-Line Extender is the perfect solution for extending HDMI A/V signals over HDMI cabling. This extender is capable of supporting a 4K (4096 x 2160 at 60Hz, 4:4:4) resolution at extension distances up to 82 feet and a 1080p resolution at extension distances up to 164 feet. The female to female connector configuration makes this device easy to install and in most instances, no external power is required. Simply connect an HDMI cable from a Blu-ray player, laptop or other HDMI device to the HDMI port of the extender labeled Source, and then connect an HDMI cable from the HDMI port of the extender labeled Display to a HDTV, projector, or monitor. The HDMI In-Line Extender is HDCP 2.2 compliant and supports exceptional 4K resolutions up to 4096 x 2160 at 60hz with 4:4:4 chroma sub-sampling, handling total HDMI data rates up to 18Gbps.

4-Port HDMI Splitter - 4K 30Hz (TAA)The 2-Port HDMI Splitter 4K 30Hz is a 1-Input 2-Output splitter supporting up to 4K (4096 x 2160 at 30hz, 4:4:4) video, ideal for applications utilizing the HDMI 1.4 standard. A perfect solution for connecting a computer, Blu-ray player, gaming console, media server, or A/V receiver to two HDMI displays. The HDMI splitter is HDCP 1.4 compliant and supports exceptional 4K UltraHD resolutions up to 4096 x 2160 at 30hz, handling total HDMI data rates up to 10.2Gbps.